Pump for water recirculation in swimming pools and spas.
- Body in polypropylene plus fiberglass. Transparent cover with pre-filter basket in polypropylene. Stainless steel shaft with carbon mechanical seals. Impeller and diffuser in noryl (resin) plus fiberglass.
- All models are single-phase and provided with condenser and thermal limiter.
Features of the Silen S series:
Stand / Base: Included
Vent plug: Yes
Check valve: No
Electrical insulation: Class F
Service factor: S1
Degree of protection: IP55
Motor type: Asynchronous
Motor rotation type: Constant speed
Type of service: Continuous
Intake diameter: D50
Discharge diameter: D50
Sealing by: Mechanical seal
Stages: Single-stage centrifugal pump
Motor cooling: Fan
Suction connection type: Screw thread
Type of connection at discharge: Threaded
Impeller type: Closed
Mechanical seal: Alumina-Graphite
Suction body: PP + 30% GF
Discharge body: PP + 30% GF
Diffuser: PP + 30% GF
Pump shaft: Stainless steel AISI 420
Motor casing: Aluminium
Impeller(s): PPO + 30% GF
Base material: PP + 30% GF
Seal base material: Polyamide + 25% GF
Pre-filter: PP + 30% GF
Pre-filter cover: Polycarbonate
Screws: Stainless steel AISI 304
Limits of use
Maximum number of motor starts (starts/minute): 0,5
Maximum working pressure (bar): 6
Ambient temperature (ºC): Min: -10 - Max: 50
Liquid temperature (ºC): Min: 4 - Max: 40
At Swimhome we not only offer you the best service and the closest treatment, we also know that getting a good price is important to you. That's why we always guarantee you the best purchase price, and if you find a better one, we'll beat it.
To do this you only have to send us by WhatsApp or email the complete budget where we offer you a better price before making your purchase.
Remember that the product must be of the same brand and reference. Do you have a better price for a very similar product? Send us your quote and we will offer you our best proposal.
Be the first to write your review !